Ditel JR-P Manual Tecnico página 69

RESISTANCE
999.9 range max. measurement current ...................... 2.3mA
9999 range max. measurement current ....................... 230A
50.00k range max. measurement current ....................... 23A
EMI max. Influence (999.9) ........................................ ±0.7
EMI max. Influence (9999) ........................................... ±2
EMI max. Influence (50.00k) ........................................ ±20
RANGE RESOLUTION
999.9 0.1
9999 1
50.00k 10
FILTER
Cutoff frequency (-3dB) .................................... 7.3Hz to 0.2Hz
Slope ..................................................................... -20dB/Dec.
DIMENSIONS
Dimensions ................................... 96 x 48 x 60 mm (1/8 DIN).
Panel cutout ........................................................ 92 x 45 mm.
Weight .......................................................................... 150g.
Case material ................................... UL 94 V-0 polycarbonate.
2RE OPTION
Maximum switching current (resistive load) ......................... 8A
Maximum sitching power ................................. 2000VA / 192W
Maximum switching voltage .......................... 400VAC / 125VDC
Contact rating ....................................... 8A @ 250VAC / 24VDC
Contact resistance ..............................  100m at 6V DC @ 1A
Contact type .................................................................. SPDT
Operate time ...............................................................  10ms
NOTE:
In case that the outputs are used to drive inductive
loads, it is recommended to add an RC network between
the coil terminals (preferably) or between the relay
contacts, to limit electromagnetic effects and to extend
contacts life.
SERIE KOSMOS
ACCURACY
±(0.1%rdg + 0.7)
±(0.1%rdg + 6)
±(0.1%rdg + 35)
www.ditel.es
JR-P / JR20-P
69