LG LA66 Serie Manual De Usuario página 68

MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
y Make sure to turn the power off and disconnect the power cord and all other cables first.
y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
y To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
y To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
y Avoid touching the screen at all times, as this may result in damage to the screen.
y Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
y Do not use any chemicals as this may damage the product.
y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem Solution
y Check the remote control sensor on the product and try again.
Cannot control
y Check if there is any obstacle between the product and the remote control.
the TV with the
y Check if the batteries are still working and properly installed (
remote control.
y Check if the product is turned on.
No image display
y Check if the power cord is connected to a wall outlet.
and no sound is
y Check if there is a problem in the wall outlet by connecting other products.
produced.
y Check the power control settings. The power supply may be interrupted.
The TV turns off
y Check if the Auto sleep feature is activated in the Time settings.
suddenly.
y If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
y Turn the TV off/on using the remote control.
When connecting
y Reconnect the HDMI cable.
to the PC (HDMI
y Restart the PC with the TV on.
DVI), 'No signal'
or 'Invalid Format'
is displayed.
MAINTENANCE / TROUBLESHOOTING
27
to , to ).