WOOX R7074 Guia De Inicio Rapido página 4

8.Press confirm button in the Woox
English
home app.
9.The app will now search for the device and
register is to your account.
10. Enter the device name.
Installation
1. Install battery into smoke alarm and pair it to
Woox home app.
2. Make sure the smoke alarm is in the range of
Zigbee gateway's signal. Effective range testing:
short press the reset buton of smoke alarm after
connected to gateway. If the indicator light is
flashing, it means that the smoke alarm
communicate effectively with the Zigbee
gateway.
3. Remove the mounting bracket from the body
of doorbell by pullingit down.
4. Mark the position of the mounting holes on
the wall using the mounting bracket as a
template. Drill out the mounting holes taking
care to avoid any joists, electrical cables or water/
gas pipes that may be hidden beneath the
surface.
5. Once the holes have been drilled out insert
the rawl plugs into the holes and fix the wall
plate to the wall using the correct mounting
screws provided.
6. Placing the body of the smoke alarm on the
wall plate
3