Clock Adjustment - Brigmton BT-251-B-N Manual De Instrucciones

OPERATING
Open the battery compartment and insert the batteries as indicated in the
battery compartment.
AC
Plug the cord into the power outlet.
To unplug the appliance completely from the mains, unplug it from the
mains.

CLOCK ADJUSTMENT

1. Check that the radio is off.
2. Press CLOCK SET for 3 seconds on the front panel to start clock setting.
3. Press the PRESET + button to select 12 hours / 24 hours.
4. Press CLOCK SET on the front panel to set the hour.
5. To set the hours, press PRESET + or PRESET - while the display continues
to flash.
6. Press CLOCK SET on the front panel until the minute setting.
7. To adjust the minutes, press PRESET + or PRESET - while the display
continues to flash.
8. Press CLOCK SET on the front panel to complete the clock setting.
ADJUSTING THE ALARM
1. Check that the radio is off.
2. Press AL SET for 3 seconds on the front panel to start alarm setup.
3. To set the hours, press PRESET + or PRESET - while the display continues
to flash.
4. Press AL SET on the front panel until the minute setting.
5. To set the minutes, press PRESET + or PRESET - while the display
continues to flash.
6. Press AL SET on the front panel and press PRESET + or PRESET - to select
the alarm sound as Buzz or Radio.
7. Press AL SET on the front panel and press PRESET + or PRESET - to select
the volume of the alarm sound.
8. Press AL SET on the front panel to complete the alarm setup.
NOTE: Press AL SET to activate / deactivate the alarm function. To ensure
that the alarm icon is on if the alarm function is in use,