Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Functional description
The pre-separator functions together with the dust extractor and uses vacuum (suction) to force the air through the suc-
tion cover/ nozzle. Coarse separation is carried out in the pre-separator's cyclone, which separates coarse dust highly
eff ectively and greatly assists the dust extractor.
The pre-separator has the following discharge options:
c – Plastic bag: The extracted and separated material is collected in a plastic bag that can be detached in one simple
operation. The material can easily be recycled or disposed of.
a - Container: A cylindrical container for collection of separated material.
L – Longopac: The machine is equipped with a fl exible bag system, in which the dust is collected in a closed system.
Technical data
DC F Tromb L Wolff
HxWxL [mm]
Weight [kg]
Inlet [mm]
Collecting container [l]
Operation
Emptying see Picture A
a – Container
The container underneath the cyclone should be emptied when about 2/3 full.
c – Plastic bag
The plastic bag should be replaced when the dust level is about 5 cm below the discharge fl ap.
L – Longopac
Close the bag using the supplied cable ties when you believe that it has been fi lled to a suitable level. Another cable tie
is used a little further up. This forms the bottom of the next bag. The fi lled bag is then cut off , and the machine is ready to
be used again.
10
1290 x 600 x 780
32
Ø76
longopac
Publicidad
