Publicidad
Idiomas disponibles
Idiomas disponibles
Extension Cords
Indoor
If an extension cord must be used, be sure it is:
• a 3-wire extension cord that has a 3-blade grounding
plug, and a 3-slot receptacle that will accept the plug on
the product
• in good condition
• no longer than 50' (15.2 m)
NOTICE: Risk of Property Damage. The use of an undersized
extension cord will cause voltage to drop resulting in power
loss to the fixture and may damage the fixture components,
resulting in a complete malfunction.
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off, disconnect it from power
source and put it on a stable secure position
before making any adjustments or removing/
installing attachments or accessories.
WARNING: RISK OF FALLING. If this fixture is
not properly secured, it can fall and can cause
damage to the unit, surrounding property, and
could result in serious injury or death to the user
or other living objects. DO NOT hang or suspend
the fixture in any situation. Always use the fixture
in a stable secure position to prevent accidental
movement of the unit.
KNOW THIS FIXTURE
READ THIS MANUAL AND SAFETY WARNINGS BEFORE
USING THIS LIGHT. Compare the illustrations with the light
to become familiar with the location of its switch and
adjustment features. SAVE THIS MANUAL FOR FUTURE
REFERENCE.
Additional Functions (Fig. A, I)
WARNING: RISK OF FALLING. Always hold the
fixture when unplugging the power cord from
Grounded Outlet
Port(s)
5
. DO NOT PULL only on the cord(s) to
disconnect.
2 USB Ports
5
and 1 Grounded Outlet
output voltage is 5V. USB current is 1A. Grounded outlet is
only compatible with devices operating on standard 120
VAC/60Hz power. Maximum current usage is shown below.
Condition
With light on and USB ports are occupied
With light off and USB ports are not occupied
, or USB Device(s) from USB
3
3
are included. USB
Maximum Plug Current
allowed
8.5A
10A
Fig I.
5
CAUTION: Lights can be daisy-chained. After the first
light is plugged in, a maximum of nine other fixtures
can be connected in line. Keep in mind that as each
fixture is added, the plug capacity is lessened by ~1A.
If the maximum number of lights is reached, then the
outlet on the last unit cannot be used.
Light Switch and Master Switch (Fig. A, J)
Press Light Switch
2
towards "II" to run at 100% light output.
Press Light Switch
2
towards "I" to run at 50% light output.
Press Light Switch
towards "O" to turn off the light.
2
When the fixture is overloaded, Master Switch
turned off automatically. Disconnect the devices and press
Master Switch
towards "RESET" to use the fixture.
6
Fig J.
2
CARE AND MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off, disconnect it from power
source and put it on a stable secure position
before making any adjustments or removing/
installing attachments or accessories.
English
3
will be
6
6
5
Publicidad
