If the kettle is not placed on a level surface, it can tip over due to
the movement of the boiling water and cause damage to property
and under certain circumstances may also cause burn injuries.
•
Never leave the kettle unattended when in use.
Unplug the plug from the socket when the kettle is unattended.
•
DANGER of electric shock
If the device's power cable is damaged, it must be replaced by
•
the manufacturer, their service department or by a similarly
qualified person in order to prevent any hazards.
•
Never open the housing of the base (7), as this does not contain
any parts to be maintained. If the housing is open, there is a risk
of electric shock.
If you notice any smoke, unusual noises or smells, switch off
•
the kettle immediately and remove the plug from the socket.
If his happens, you must stop using the kettle until it has been
checked by a specialist. If the device catches fire, do not inhale
any resulting smoke. If you do inhale any smoke, seek medical
attention. Smoke inhalation can be harmful to your health.
Ensure that the power cord (6) cannot be damaged by sharp
•
edges or hot surfaces. Always wrap the power cord (6) around
the cable rewind under the base (7) after use.
•
Ensure that the power cord (6) is not jammed or squashed.
The device must always be disconnected from the mains
•
network if left unattended, prior to assembly and disassembly or
cleaning.
Never remove the plug from the power socket by pulling the
•
power cord (6); only ever pull the plug.
If you find visible damage on the kettle or the power cord (6),
•
switch off the device immediately, remove the plug from the
power socket and contact the service.
•
Only plug the base (7) into a power socket that is properly
installed and easily accessible and whose mains voltage
10
www.haden.com
corresponds with the rating plate specifications. The user does
not have to do anything to switch the product between 50 and
60 Hz. The product is suitable for both 50 and 60 Hz supplies.
Once the device is plugged in, the power socket must be kept
easily accessible so that the plug can be pulled out quickly in an
emergency.
•
Do not spill liquid on the plug for the device.
Only plug the base (7) into a power socket that is properly
•
installed and easily accessible and whose mains voltage
corresponds with the rating plate specifications. The user does
not have to do anything to switch the product between 50 and
60 Hz. The product is suitable for both 50 and 60 Hz supplies.
Once the device is plugged in, the power socket must be kept
easily accessible so that the plug can be pulled out quickly in an
emergency.
Do not spill liquid on the plug for the device.
•
•
Never immerse the base (7) in water or any other liquid. If liquid
enters into the base (7), immediately remove the plug from the
power socket and contact the service department.
DANGER of fire
Fill the kettle (8) with a minimum of 0.5 litres of water. If you
•
do not pour in enough water, there is a risk of fire due to
overheating.
Keep the kettle at least 50 cm away from flammable and
•
combustible materials. There is a risk of fire.
Before initial use
Remove the kettle and all accessories from the packaging and check
the completeness of the delivery. Remove the protective film. Keep
the packaging material away from children and dispose of it in an
environmentally-friendly manner.
www.haden.com
11