Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
TO AVOID
SERIOUS
INJURY,
BEFORE
PERFORMING
ANY SER-
VICE
OR ADJUSTMENTS:
1.
Depress
brake pedal fully and set parking
brake.
2.
Place attachment
clutch
in "DISENGAGED"
position.
3.
Turn ignition
key to "STOP"
and remove
key.
4.
Make sure the blades
and all moving
parts have completely
stopped.
5.
Disconnect
spark
plug wire from spark
plug and place wire where
it cannot
come in contact
with plug.
TRACTOR
TO
REMOVE
MOWER
1.
Place
attachment
clutch
in "DISEN-
GAGED"
position.
2.
Lower
attachment
lift lever to its lowest
position.
3.
Disengage
belt tension
rod (K) from
lock bracket
(L).
CAUTION:
Belt tension
rod is spring
loaded.
Have a tight grip on rod and re-
lease slowly.
4.
Remove
mower
belt from electric
clutch
pulley
(M).
5.
Disconnect
front link (E) from mower
- remove
retainer
spring
and washer.
6.
Go to either side of mower and discon-
nect mower suspension
arm (A) from
chassis
and rear lift link (C) from rear
mower
bracket
(D) - remove
retainer
springs
and washers.
7.
Go to other side of mower and discon-
nect the suspension
arm and rear lift
link.
,_
CAUTION:
After rear lift links are dis-
connected,
the attachment
lift lever will be
spring
loaded.
Have a tight grip on lift lever
when
changing
position
of the lever.
8.
From right side of mower,
disconnect
anti-sway
bar (S) from right rear mower
bracket
(D) - remove
retainer
spring
and washer
and pull mower toward
you until the bar falls from the hole in
bracket.
9.
Turn tractor
steering
wheel
to the left
as far as it will go.
10. Slide mower
out from under right side
of tractor.
TO INSTALL
MOWER
Follow procedure
described
in "INSTALL
MOWER
AND DRIVE
BELT" in the As-
sembly
section
of this manual.
02937
21
Publicidad
