Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
and the delay icon blinks.
1. Load your laundry and make sure the machine door is closed.
2. Press the On/Off button,then turn the programme selector knob and select the
desired programme.
3. You can select the Anti-Crease function according to your need.
4.Press the Delay button.
5. Continue to press Delay to select the desired delay time.
6. After the Start/Pause button is pushed, the dryer is at the run condition. The
drying procedure will be automatically performed when the delay time is over.
7. If you push the Start/Pause button again, the delay function will be paused.
8. If you want to cancel the "Delay" function, please press the On/Off button.
- Time
When the Warm or Cool or Refresh programme is selected, the Time button can be
used to adjust the drying time in 10 min. steps.
- Intensity
You can adjust the dryness level of the laundry by pressing the Intensity button.
1.The intensity function can be activated only before the programme start.
2. Except the Cotton Iron,Warm,Cool,Refresh,Wool, Delicate all the other programmes
can be the Intensity function.
- Anti-Crease
At the end of the drying cycle, the anti-crease time is 30 minutes (default) or 120
minutes (selected).
The Anti-Crease light will illuminate when the anti-crease function is selected. This
function prevents the laundry from creases. The laundry can be removed during the
anti-crease phase. Except Cool , Refresh , Wool all the other programmes provide this
function.
- Favorite
Used to define and save your favourite programme, which is used frequently.
1.Select the desired programme and other drying functions.
2.Press and hold the Time button for 3 seconds until the beep sounds and the desired
programme has been saved.
3. Turn the programme selector to the Favorite position, then you can start your
31
SECADORA EVVO NATURE S8C / S8CX
Publicidad
