Descargar Imprimir esta página

Herschel Select XLS500TW-INT Instrucciones De Instalación Y Funcionamiento página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
5 Year Warranty
Register your product here
Within five years from date of purchase Herschel will repair or replace the heater where the fault is due to
defects in materials or workmanship. This warranty is for standard domestic use only and excludes commercial
uses. In the event of a warranty claim please visit the Customer Service area of the Herschel Website and follow
the Warranty Claim process. You will need proof of purchase and photographs of the heater.
A prerequisite for validity of the warranty is use at the specified supply voltage of the heater and use in
accordance with the conditions specified in this manual. Any further warranty or claims are excluded.
The warranty covers the repair or replacement of the defective product only and Herschel shall have no liability
for installation costs or consequential loses however incurred. The decision to repair or replace will rest solely
with Herschel and any replacement will be as close as possible in specification to the failed heater.
Removing the serial number will void the warranty. The warranty will also be void if the heater has been
tampered with or opened in any way.
The product power label must be left on the panels where they can be accessed after installation if necessary.
Herschel Infrared Ltd will assume no responsibility for scratches on surface or frames after first use.
Disclaimer
Herschel Infrared Ltd cannot accept responsibility for damage, loss or injury caused by ingress of water or
moisture, accidental damage, mishandling, external impact, adjustment by unauthorised personnel or failure to
follow the correct maintenance and safety precautions as stated in the manual. Refer to Herschel Infrared Ltd's
warranty policy for full details. See https://www.herschel-infrared.co.uk.
Compliance with Ecodesign directive 2009/125/EC
When used without the SmartLife app, the Select XLS Towel Heater is only suitable for well insulated spaces or
occasional use.
When using the Smartlife app, the Select XLS towel heater meets EcoDesign (Lot 20) requirements.
Herschel is not responsible for any breach of the legislation where the Select XLS Towel heater is used without
the control methods recommended in these instructions.
ECODESIGN Information for Select XLS towel heater
When installed as fixed Electric Space Heaters
Applies to ALL models covered by these instructions.
Seasonal space heating energy efficiency pre Lot 20
Target efficiency target post Lot 20
Actual efficiency post Lot 20
Technical Details
Nominal heat output (P
)
nom
Maximum continuous heat output (P
Type of control and efficiency gain
Electronic room temperature control plus week timer
Distance Control (app)
https://www.herschel-infrared.co.uk/customer-service/warranty-registration/
)
max,c
Select XLS Towel heater
= 30%
= 38%
= 38%
= Rated Wattage of heater (see product label)
= Rated Wattage of heater (see product label)
= 7%
= 1%
ENGLISH
.

Publicidad

loading

Este manual también es adecuado para:

Select xls700tw-int