Johnson Eco Vacuum Instrucciones De Funcionamiento página 15

CLEANING or replacing the side filters (F)
7) Release the grill (E) by pressing on the hook.
Remove the filters (F).
Wash them and dry thoroughly.
Replace them in the grill (E).
Reposition the grill (E) before inserting it into the lower coupling and then block it by
pressing down on the hook.
Attention: Reassemble the right filter/grill in the right side and the left filter/grill in
the left side.
CLEANING the filter HEPA (M)
Remove the filter (M).
Clean it to restore the initial filtering characteristics.
If necessary, wash with running water.
Dry thoroughly and replace.
Never operate the appliance without this filter!
When replacing the filter, pay attention to the direction of the insertion of this body-
half (A).
Since it is not symmetrical, it can only be assembled in one direction.
CLEANING the body halves (A and B)
This operation must be carried out with the appliance OFF and the plug disconnected
from the power outlet.
Use a non-abrasive soft and dry cloth.
• Not suitable for vacuum fine dust.
15