CHARGING THE DEVICE
• Carefully plug the USB-C connector into the USB-C
charging port of the device�
• Plug the USB connector of the charging cable into a USB
port on your computer or USB charger�
• The LED turns red when the device is charging� When the
battery is charged, the light goes out and charging stops
automatically�
• The rechargeable battery of the device should be charged
for approximately ±2�5 hours before using the device for
the first time�
• Unplug the charging cable from the device, which is now
ready for use�
• If the battery level is low, you will hear two beep every
10 seconds, indicating that the battery needs to be re-
charged�
USING THE PRODUCT
Push the "on/off" switch to the "on" position to turn the
product on
ours will light up (white, green, blue, and red)�
Push the "on/off" switch to the "off" position to save the
battery and/or switch Zen Box off
EN
: there will be a "beep" sound and four col-
�
11