Mad Catz S.T.R.I.K.E. 6 Guia De Inicio Rapido página 4

Function Keys
FN + W: Short Press:↑Cursor Steps Up / Long Press: Cursor Rolls Up
FN + R: Short Press: Single Roll Up / Long Press: Fast Roll Up
FN + A: Short Press: ← Cursor Steps Left / Long Press: Cursor Rolls Left
FN + S: Short Press:↓Cursor Steps Down / Long Press: Cursor Rolls Down
FN + D: Short Press: → Cursor Steps Right / Long Press: Cursor Rolls Right
FN + F: Short Press: Single Roll Down / Long Press: Fast Roll Down
FN + M: Lighting Speed Up: 5 Levels
FN + , <: Lighting Speed Down: 5 Levels
FN + . >: S.T.R.I.K.E. 6 Software APP Start
FN + ; : : Brightness Down: 5 Levels
,
FN + " : Brightness Up: 5 Levels
How to Change Switches
1
Use the keycap puller
tool to clamp a keycap
and pull upwards to
remove.
CAUTION
1. To reduce the risk of fire or electric shock, DO NOT expose the S.T.R.I.K.E 6 keyboard to liquids or moisture.
2. DO NOT attempt to repair or modify the S.T.R.I.K.E 6 keyboard in any way. Any and all damage intentionally
or unintentionally arising from the attempted repair or modification of this device will void the warranty.
Any improper use of S.T.R.I.K.E 6 keyboard will also void the warranty.
(20%/40%/60%/80%/100%)
(0%/25%/50%/75%/100%)
(0%/25%/50%/75%/100%)
2
Use the key switch
puller tool to push in
the two tabs located
on both sides of the
switch. Once pushed
in, pull upwards to
remove the switch
from the board.
S.T.R.I.K.E. 6
(20%/40%/60%/80%/100%)
3
Select a switch and
examine the copper
pins at the bottom of
the switch to ensure
they are straight.
Align the copper pins
with the sockets on
the pad. Insert by
pushing straight
down.
ENGLISH
4
Align the keycap with
the switch stem and
press down gently to
insert.
EN