Descargar Imprimir esta página

Optimus F-4182 Manual De Instruccion página 2

18"& 20" el grado industrial ventilador alto de velocidad

Publicidad

Idiomas disponibles

Idiomas disponibles

PLEASE READ AND SAVE THESE IMPORTANT SAFEGUARDS
Thank you for choosing an Optimus product. To ensure the best performance from your
product, please read and save the following instructions.
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECUATIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO
PERSON, INCLUDING THE FOLLOWING:
Read all instructions before using this product.
Use this product only as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electrical shock or injury to person, and may void the
warranty.
Always unplug unit before assembly, disassembly or cleaning.
Always unplug unit when not in use, when moving from one location to another and
before cleaning.
To disconnect, grip the plug and pull it from the wall outlet. Never yank the cord.
The use of attachments not recommended or sold by the appliance manufacturer may
.
cause hazards
Avoid contact with moving parts.
DO NOT operate this product with a damaged cord or plug, after a malfunction, or is
dropped or damaged in any manner. Return the unit to Optimus Enterprise, Inc. for
examination, electrical or mechanical adjustment, or repair.
Do not operate the unit in the presence of explosive and/ or flammable fumes.
Do not place the unit or any parts near an open flame, cooking or other heating
appliance.
Extreme caution is necessary when this unit is used by or near children or invalids and
whenever the unit is left operating and unattended.
Do not use outdoors.
Always use on a dry level surface.
Do not operate if the product housing is removed or damaged.
A loose fit between the AC outlet and plug may cause over heating of the plug. Have a
qualified electrician replace the outlet if the outlet is not fit properly.
DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners or like.
Arrange cord away from traffic area and where it will be tripped over.
NEVER connect the unit to any power sources other than a 120 volt alternating current
polarized outlet.
WARNING:
To reduce the risk of electric shock, DO NOT use this product with any solid-
state speed control and DO NOT insert finger or any object into grill.
CLEANING/ MAINTENANCE INSTRUCTIONS:
During Season Care:
Before cleaning, be sure to turn off and unplug the unit.
Keep this unit clean. Carefully wipe the unit with a soft, damp cloth. Please be very
cautious near the motor.
DO NOT immerse the fan in water and never allow water to drip into the Motor Housing.
Never use gasoline, benzene or thinner. This will damage the surface of the unit.
After cleaning, be sure to completely dry the unit with a cloth or tower.
Care:
Your product can be stored in the off-season.
Before putting the unit in storage, clean thoroughly, cover with a vinyl bag and store in a
cool and dry place. We recommend using the original (or appropriately sized) box.
SERVICE INSTRUCTIONS:
Do not attempt to repair or adjust any electrical or mechanical functions on this unit.
Doing so will void the warranty.
If you have any questions regarding this unit's operation or believe any repair is
necessary, please call 1-888-672-5832 to speak with a Customer Service Representative.
If you need to exchange the unit, please return it, in its original carton with a sales receipt
enclosed, to the store you purchased it. If you are returning the unit more than 30 days
after the date of purchase, please see the enclosed warranty.
If you have any other question or comments, feel free to write us:
OPERATING INSTRUCTIONS:
PRE-OPERATING INSTRUCTIONS:
Carefully remove your product from the box (please save the carton for off-season
storage).
Make sure the unit is in the OFF position before plugging the unit into the outlet.
Assemble the base before operating.
OPERATING INSTRUCTIONS:
Place fan on a firm level surface.
Plug the power cord into any standard 120V AC, 60Hz outlet. Please make sure the
Selector (Speed) Control is in the OFF position.
Tilting and adjusting the fan to the desired angle of airflow.
3 Speed Rotary Switches:
The switch is located on back of the unit. Select the desired fan speed setting by rotating the
switch knob.
After Season
Optimus Enterprise, Inc.
2201 E. Winston Road, Unit J,
Anaheim, CA 92806
E-mail: OptimusEnt@aol.com

Publicidad

loading

Este manual también es adecuado para:

F-4202