Anker PowerConf C202 Manual De Instrucciones página 5

You may need to manually select this webcam and its built-in microphones for your
PC system or software.
A) Windows
1. Go to Settings > Privacy > Camera and turn on "Allow apps to access your
camera".
2. Turn on each of the listed apps where you want to use the camera. After you
open the Camera app, you may need to switch to the Full HD Camera.
B) macOS
1. Go to the Apple menu > System Preferences > Security & Privacy, then choose
Camera from the list on the left side.
2. Locate the app(s) you want to enable camera access for and check the box
alongside that app name to enable camera access for that application.
C) Software (Zoom or more)
Go to Settings > Video > Camera and choose this webcam.
Controls
Slide to cover the camera lens for privacy. The camera will turn off automatically
when blocked by the privacy cover.
Using AnkerWork Software
Download the AnkerWork Software from
software.ankerwork.com
Download and install the AnkerWork software on your PC to update firmware and adjust settings.
Download and install the AnkerWork software on your PC to update firmware and adjust settings.
03 EN
OFF