HOW TO ADJUST THE DRAWER
*If necessary, each drawer is designed to be removed or replaced:
DRAWER REMOVAL:
8.1. Pull out the drawer until the lock pins located at the bottom of the drawer are easy to reach.
8.2. Pull out the lock pins located at the bottom of the drawer to the sides to release the pins.
8.3. Lift the drawer from the front side.
8.4. Pull out the drawer to remove it.
DRAWER INSTALLATION:
9.1. Place the drawer back in first so that the drawer slides into the glide tab.
9.2. Put down and insert the drawer into the glides.
9.3. Completely slide in the drawer, then the drawer will automatically click in place.
9.3
8.1
8.2
Bottom View
8.3
8.4
9.1
9.2
Drawer
PAGE 9