The snow thrower doesn't start.
The motor is on, but the auger
does not turn.
The snow thrower leaves a thin
layer of snow behind.
TECHNICAL DATA
Rated voltage
Max. No-load speed
Clearing width
MAX Working Depth
EN
Operation type
Throw distance
Wheel size
Battery type
Machine weight (bare tool)
**X may be followed by one or two characters. All models are the same except model number and trademark.
The suffix in models may be number from "1" to "999" or English letter "A" to "Z" or "M1" to" M9" which
means different package or the various of accessories packed in the package.
*** Voltage measured without workload. Initial battery voltage reaches maximum of 60 volts. Nominal voltage
is 54 volts.
SUGGESTED BATTERIES AND CHARGERS
Battery
KA3008
KA3002
We recommend that you purchase your accessories from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store personnel can assist you and offer advice.
14
Safety switch is not flipped up.
The auger control lever is
defective.
Battery capacity is low.
The battery is not attached to
the motor.
The auger control lever is
defective.
The steel shave plate is worn.
Capacity
5.0 Ah
4.0 Ah
Flip up the safety switch and press
the auger control lever to start snow
throwing action.
Have the auger control lever replaced
by an authorized service center.
Charge the battery.
Check the connection between the
motor connector and the battery.
Have the auger control lever replaced
by an authorized service center.
Have the steel shave plate replaced
by an authorized service center.
KG470 KG470.X**
KG471 KG471.X**
60 V
Max***
6500±200 /min
24" (61 cm)
17.7" (45 cm)
Double-Stage
52' (15.8 m)
15" (38.1 cm)
Lithium-ion
132.4 lbs (60 kg)
Charger
KA3706
Positec USA, Inc. Charlotte, NC 28216 USA
Amperage
8.0 A