PREPARATION
FOR USE
If you want to change the language
of the on-screen
menu, follow the proce-
dure below.
1) Connect
the power
cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER
breton withom
unplugging
the power cord.
2) Press the POWER
breton to turn on the TV.
3) Press the MENU
button so that the menu display appears
on the TV screen.
4) Press the CH(annel)
•
or •
button to point to "[ENGLISH]".
5) Select "ENGLISH"
or "ESPAlqOL"
Spanish by using
the VOL(ume)
•
or • button.
6) Press the MENU
button to exit the menu.
•
PICTURE
CHANNEL
SET
[ENGLISH]ESPAiqOL
V-CHIP
SET
UP
CAPTION
[OFF]
PICTURE
CHANNEL
SET
•
[ENGLISH]ESPAiqOL
V-CHIP
SET
UP
CAPTION
[OFF]
[-
•
' '
_I]_IiiN_tH
NOTE: You MUST PRESET channels
BEFORE
using CHANNEL
•
or •
button.
To preset a channel or to change a preset channel,
follow the procedure
below.
i) Press the POWER
button to turn on the TV.
2) Press the MENU
button so that the menu display appears
PICTURE
• CHANNEL SET
on the TV screen.
[ENGLISH]ESPAiqOL
3) Press the CH(annel)
•
or •
button to point to "CHANNEL
SET".
V-CHIP SET UP
CAPTION
[OFF]
Then, press the VOL(ume)
•
button.
4) Press the CH(annel)
•
or •
button to point to "AUTO
MEMO".
Then, press the VOL(ume)
•
button.
ADD/DELETE
The tuner scans and memorizes
all active channels
in your area.
•
AUTO MEMO
STEREO
[ON]
• The TV distinguishes
between
standard TV channels
and cable (CATV)
channels.
• When AUTO MEMO action is completed,
the lowest memorized
channel reappears
on the
screen.
• When you press the CH(annel)
•
or • button after selecting
AUTO MEMO,
the tuner will stop at the memorized
channels
only.
• The TV may memorize
TV channels
as CATV channels
if the reception
conditions
are poor. If
this happens,
try the AUTO MEMO action again when reception
conditions
are better.
[ADD/DELETE FUNCTION]
1)Press the MENU breton so that the menu display appears on the TV
screen.
2) Press the CH(annel) • or • breton to point to "CHANNEL SET".
Then, press the VOL(ume) • breton.
3) Press the VOL(ume) • breton so that "ADD/DELETE" is selected.
4) Use the CH(annel) • or • breton to select the channel you wish to pm
into memory or to erase from memory.
Note: The display will return to the normal screen amomatically in abom
10 seconds.
Perform "ADD/DELETE" function while this display appears on the screen.
• Press the VOL(ulne) • or • breton to light tip the channel nulnber
in LIGHT BLUE if you wish to add the channel imo memory.
• Press the VOL(ulne) • or • breton to light tip the channel nulnber
in LIGHT RED if you wish to erase the channel ffOln memory.
5) Press the MENU breton m exit the menu.
You may select to listen in monaural
sound or stereo sound.
When you want to listen a broadcast
in monaural
sound, set the stereo mode
to OFF.
Note: In the stereo mode, stereo signal is expanded
to create a more spacious
sound effect by moving the left channel and the right channel of the high fre-
quency.
1) Press the MENU breton so that the menu display
appears on the TV
screen.
2) Press the CH(annel)
•
or •
button m point to "CHANNEL
SET".
Then, press the VOL(ume)
•
breton.
3) Press the CH(annel)
•
or •
breton so that
"STEREO"
is selected.
4) Press
the VOL(ulne)
•
or •
breton to select
ADD/DELETE
AUTO MEMO
the stereo mode
O11 or off.
•
STEREO
[OFF]
Stereo sound is effective
when "STEREO"
is
(111.
PICTURE
•
CHANNEL
SET
[ENGLISH]ESPAiqOL
V-CHIP
SET
UP
CAPTION
[OFF]
•
ADD/DELETE
AUTO
MEMO
STEREO
[ON]
•
PICTURE
CHANNEL SET
[ENGLISH]ESPAiqOL
V-CHIP SET UP
CAPTION [OFF]
PICTURE
•
CHANNEL SET
[ENGLISH]ESPAiqOL
V-CHIP SET UP
CAPTION [OFF]
[
ADD/DELETE
AUTO MEMO
•
STEREO
[ON]
Ii!i_'llNIi_
I_l_[ImiiIoN'_l
If the power
flails or is disconnected
while the TV is powered
on, the TV will turn on automatical-
ly when the power resumes.
OPERATIONS
_IiJ]I]i_
- ,I_OII_llli
1)Press the POWER breton to turn on the TV.
2) Select the desired channel with the CH(annel) • or • breton.
3) Adjust the volume to the desired listening level using the VOL(ume) • or • breton.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
[€_Ii_iilNX_IilliN[€'ll!llll_lll_Jll_
The sleep timer flmction allows you to have the power
amolnatically
turn off
after a set time period.
1) Press the POWER
button to turn on the TV and press the SLEEP button
on the remote control.
2) You may change the sleep time by pressing
the SLEEP
SLEEP 10
button on the remote control repeatedly.
The timer can be
set tip to 90 minutes,
10 minutes each time the SLEEP
button is pushed.
(The timer display counts tip and sleep
timer will be displayed
on the screen when you press the
SLEEP breton on remote control.)
Note:
When you disconnect
the unit froln the AC outlet, or if you have a power t:ailure, the
sleep time will be lost.
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded
tapes, etc.
with either a dialogue
caption or text display
added to the program.
: Press the VOL(ume) • or • breton.
1) Press the MENU button so that the menu
display
appears on the TV screen.
2) Press the CH(annel)
•
or •
button to point
to "CAPTION".
3) Press the VOL(ume)
•
or •
button to select
the lnode you wish.
4) When done, press the MENU
button to exit
the menu.
_iI_
_
|Ill
r.,c..E
F---E
I I---E
I---E
r.--E
CHANNEL
SET
CHANNEL
SET
CHANNEL
SET
CHANNEL
SET
CHANNEL
SET
[ENGLISHIESPANOL
_
[ENGLISHIESPAiIOL
_
[ENGLISHIESPAiIOL
_
[ENGLISHIESPAiIOL
_
[ENGLISHIESPANOL
]
V-OH,PSETUP
[
L
V-CHPSETUP
V-CHIPSETUP
V-CH,PSETUE
J
/
V-CHPSETUE
•
CAPTION
[OFF]
•
CAPTION
[ C1]
•
CAPTION
[
C2]
•
CAPTION
[ T1]
•
CAPTION
[
T2]
!
!
1) Press the MENU button so that the menu display
appears on the TV screen.
2) Press the VOL(ume)
•
button so that "PICTURE"
is selected.
3) Select the feature you wish to adjust with the CH(annel)
•
or •
button and adjust it with the
VOL(ume)
•
or • button.
GAME
MODE
Set to the most suitable position
for TV
GAME.
[+]:ON
[-] :OFF
BRIGHT
Adjust until the darkest parts of the picture
are
as bright as you prefer.
[+] : increase brightness
[-] : decrease brightness
CONTRAST
Adjust to increase
or decrease
contrast.
[+] : increase contrast
[-] : decrease
con-
trast
COLOR
Adjust to be brilliant
or pale color.
[+] : be brilliant
color
[ - ] : be pale color
TINT
Adjust to obtain natural
skin tones.
[+] : greenish
tone [-] : reddish
tone
SHARPNESS
Adjust to detail in the picture.
[+]:increase
sharpness
[-]:decrease
sharpness
Notes:
• "+" is achieved
by pressing
the VOL(ume)
•
button and "-" by pressing
the VOL(ume)
•
button.
: Press the CH(annel)
•
or •
button.
• In the above steps, the picture adjustlnent
display will disappear
froln the TV screen
automatically
after about 10 seconds
if you
do not press any buttons.
Press the MENU
and VOL(ume)
• button so that "PIC-
TURE"
is selected.
Then, press the
CH(annel)
•
or • button repeatedly
until
the display returns
to the screen.
• If you adjust any picture
control after you
set the Game mode to [ON], the Game lnode
is set to [OFF] autolnatically.
[USING THE
GAME
BUTTON]
You may also set the Game mode and external
input mode at the same time by pressing
the
GAME button on the remote control.
"GAME"
appears on the TV screen.
• To exit the Game mode and external
input
mode, press the GAME breton on the relnote
control again.
• To cancel the Game lnode only, adjust the
pictnre control. In this case, "VIDEO"
instead
of "GAME"
appears on the TV screen.
• If you press the GAME
button when the TV
is oft; the TV turns on and will be in the
Game lnode and external
input mode auto-
rustically.
]
V-CHIP enables parems to prevent their chil-
dren from watching
inappropriate
material on
TV.
V-CHIP reads the ratings for progralmning
(except
for news and sports programs,
unedited
lnovies on prelnium
cable channels,
and
Elnergency
Broadcast
System
signals),
then
denies access to progralraning
if the program's
rating meets or exceeds
the limitations
you
select. In this case, "PROTECTED
PROGRAM
by ..." message
appears on the TV screen.
To block certain ratings,
follow the steps
below.
• Progralnming
may be rated by the Motion
Picture Association
of America
(MPAA) or
according
to the Television
Parental
Guidelines.
In order to block any inappropri-
ate progralmning,
set your limits in both
places
(MPAA RATING
and TV RATING).
• You cannot access the lnenu when the "PRO-
TECTED
PROGRAM
by ..." message
appears.
In this case, change to an unblocked
chmmel, then press the MENU button.