Tremmen Technology BSL-22112V Manual Del Usuario página 216

4.5 Connecting to an external AV signal source (HDMI)
Follow the figure below to connect an HDMI signal source to the HDMI jack on the rear panel of the unit.
After connection, turn on the unit and the external AV signal source and use the SOURCE and direction buttons to
select HDMI mode, and then press the ENTER button to confirm.
4.6 Connection to PC
The unit can be connected to a PC (personal computer) via VGA cable. Follow the figure below to connect:
1. Connect one end of the VGA cable to the VGA input connector on the rear panel of the unit and connect the other end
to the PC.
2. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit and connect
the other end to the audio output connector of the PC.
After connection, turn on the unit and the external AV signal source and use
eleven