Publicidad
Idiomas disponibles
Idiomas disponibles
6.4 Lullaby and White Noise Setting
You can soothe the baby to sleep by playing 4 pre-programmed lullabies from the Baby Unit. This
feature is controlled remotely from the Parent Unit.
• Press the MENU/EXIT button (8) and the menu screen will be displayed on the Parent Unit.
• Press the LEFT button (11) or RIGHT button (12) until the Lullaby icon is highlighted in red and then
press OK (6) to confirm.
• Press the LEFT button (11) or RIGHT button (12) to select the desired melody (1-4), a LOOP mode or a
White Noise sound.
• Press OK (6) to confirm.
• Press the MENU/EXIT button (8) to Exit.
• In order to stop the lullaby playback, go to the "Lullaby Setting" menu and select OFF icon.
Note 1: Once the lullaby function is turned on, the lullaby icon will be displayed on top of the LCD
screen.
Note 2: The lullaby default setting is OFF.
Note 3: When playing the lullabies in a loop mode only the 4 melodies are available; the White Noise
does not play in the loop mode.
6.5 Night Light
This monitor features a night light integrated into the Baby Unit, allowing you to remotely activate a
comforting glow to baby's room.
• Press the MENU/EXIT button (8) and the menu screen will be displayed on the Parent Unit.
• Press the LEFT button (11) or RIGHT button (12) until the Night Light icon is highlighted in red and then
press OK (6) to confirm.
• To activate the night light press the LEFT button (11) or RIGHT button (12) to select the Night Light On.
Press OK (6) to confirm.
• To deactivate the night light press the LEFT button (11) or RIGHT button (12) to select the Night Light
OFF. Press OK (6) to confirm.
• Press the MENU/EXIT button (8) to Exit.
NOTE: Night Light feature can also be activated manually on the Baby Unit. Briefly press the PAIR
button (26) on the back of the Baby Unit. Press again to deactivate.
14
7. Maintenance
• All of the following maintenance procedures shall be performed when baby and parent units are
not plugged in to the wall outlet.
• Clean the surfaces of the Baby and Parent Units with a soft, fluff-free cloth.
• Never use cleaning agents or solvents.
• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allowing
water into any openings.
8. Customer Support
If you have any problems setting up or using this product you will find useful tips and information in
the Troubleshooting section of this user guide.
If you have further questions about using the product after reviewing the resources above or would
like to purchase replacement parts or accessories, please contact us:
E-mail :
support@babysensemonitors.com
Toll Free Number:
Telephone Number:
(972) 3-9566604 (INTERNATIONAL)
Important:
Please retain your purchase receipt and attach to the back page of this user guide as you will need to
produce this if warranty service is required.
9. Warranty Terms
We take quality very seriously. This is why all of our products come with a one year warranty from the
original purchase date against defects in workmanship and materials.
If you have warranty or support issues please contact our customer service:
support@babysensemonitors.com
(833) 568-2229 (USA ONLY)
15
Publicidad
