Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION LEAFLET FOR VARIABLE-SPEED MINI GRINDER
Thank you for buying this Mini Grinder kit. Please read these instructions carefully before using
the product.
TECHNICAL SPECIFICATIONS
Available Voltages
Amperage rating
No Load Speed
Collet chuck capacity
IMPORTANT! – Safety Instructions for all tools
WARNING: When using electric power tools, important safety precautions must always be
adhered to in order to reduce the risk of fire, electric shock and personal injury.
PLEASE READ THE FOLLOWING CAREFULLY:
1.
KEEP THE WORK AREA CLEAN. Untidy benches and work areas invite injuries.
2.
CONSIDER THE WORK AREA ENVIRONMENT. Do not use power tools in damp or wet
locations. Do not expose power tools to rain. Keep work areas well lit.
3.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. Eg.
Radiators, pipes, refrigerator enclosures.
4.
KEEP CHILDREN AWAY. All visitors must be kept away from the work area. Do not let visi-
tors come into contact with the tool or extension cord.
5.
STORE IDLE TOOLS. When not in use, tools must be stored in a dry place, out of reach of
children.
6.
DO NOT FORCE THE TOOL. It will do the job in hand better and safer at the rate for which
it was intended.
7.
USE THE RIGHT TOOL. Do not force a small tool to do the job of a heavy-duty power tool.
Do not use the tool for any purpose for which it is not intended.
8.
DRESS PROPERLY. Do not wear loose clothing or jewellery, as these can be caught in
moving parts. Gloves and non-skid footwear are recommended when working outdoors.
Wear a protective head covering to contain long hair.
9.
USE SAFETY GLASSES. Also use face and dust masks to guard against dust.
10. DO NOT ABUSE THE CORD. Never carry the tool by the cord or pull the cord to discon-
nect the tool. Keep the cord away from heat, oil or sharp objects.
11. SECURE YOUR WORK. Use clamps or a vice to hold your workpiece in position. It is
much safer than using your hand and it frees both hands to operate the tool.
12. DO NOT OVERREACH. Keep proper footing and balance at all times.
13. MAINTAIN TOOLS WITH CARE. Keep tools clean for better and safer performance. Fol-
low instructions for lubrication and changing accessories. Keep hands dry, clean and free
from oil and grease.
14. DISCONNECT TOOLS. When not in use, before servicing and when changing any acces-
sories.
15. REMOVE ADJUSTING KEYS AND WRENCHES. Get into the habit of checking that keys
and adjusting wrenches are removed from the tool before turning it on.
16. AVOID UNINTENTIONAL STARTING. Do not carry a plugged-in tool with your finger on
the switch. Be sure that the switch is off when plugging in.
17. OUTDOOR EXTENSION CORDS. When the tool is used outdoors, only use extension
cords intended for use outdoors and so marked.
230V, 50Hz
135W
10,000 - 32,000 rpm
max 3.2mm
11
EN
Publicidad
