Publicidad
Idiomas disponibles
Idiomas disponibles
SETUP
Installation with 2.4Ghz wireless receiver
Triple-click the "POWER" button to switch the 2.4G mode, and the indicator flashes "blue-red-red", plug the 2.4G receiver
into the USB interface of the device, and connected successful.
Installation with 3.5mm jack cable
Insert the 3.5mm connector into the 3.5mm interface available on the computer, and connect the other end to the
headset jack.
Installation with Bluetooth
1. Keep the distance between the mobile phone and the headset within one meter, the closer the better;
2. Press and hold the "POWER" button to power on, the headset default the BT mode, at the time, you see the indicator
flashes "blue-red-red";
3. Turn on the Bluetooth function of your devices, search for the "FORGEON Captain", click and connect, and the
indicator slow flashes blue light.
CHARGING CONNECTION
Insert the USB charging cable connector into the available USB port of the computer, and
connect the Type-C interface to the headset at the other end for charging.
EN
Publicidad
