ulsonix TOPCLEAN HOR Manual De Instrucciones página 24

• Charge the battery before the first use and before and after a prolonged period of non-use.
• It is recommended to charge the battery twice a month.
• Charge the battery with the power adapter included with the device.
• Do not cover the power supply while charging (the power supply may get hot).
Directions for use
• If there is debris or a large amount of sand on the surface to be cleaned, remove it before cleaning with this
device.
• This equipment is designed for cleaning smooth and hard substrates. If there are cracks or other large gaps
in the floor, it may not be possible for the device to absorb water.
• Secure the equipment from unauthorized use.
• This equipment is powered by batteries. Battery acid can burn your skin and eyes. When inspecting the
battery, operators should wear protective clothing and goggles to prevent accidents.
• It is strictly forbidden to place any metal objects on the battery to avoid damage to the battery.
• Operators should wear safety shoes when handling this equipment.
• Do not put your hands or feet into the rotating brush.
3.4. Working with the device
1) Remove larger dirt and dust from surfaces to be cleaned. Before starting work, make sure there is no soil,
stones, pieces of paper, or other debris on the surface to be cleaned, this will improve work efficiency.
2) Press the power button on the back of the machine on the battery housing.
3) Apply the access card to the control panel. The machine will start up.
4) Check the battery power level indicator, if the power is insufficient, charge the battery.
5) Start the water absorption engine.
6) If needed, using the valve lever just above the brush guard, adjust the flow of clean water/detergent
according to how dirty the floor is (see figure below).
7) Start the brush engine.
8) Begin cleaning the floor.
Note : The position of the wiper affects the water absorption effect. For proper operation, it is necessary that
the wiper is in even contact with the ground. The windshield wiper wears out during use, resulting in the
need to periodically adjust the position of the wiper.