Tineco PURE ONE STATION FURFREE Serie Manual De Uso página 20

Troubleshooting
Problem
The Clean Station does not
turn on
Malfunction indicator
remains lit
Malfunction indicator
remains lit
Voice: Please replug in the
Clean Station
Malfunction indicator is
blinking
Voice: Please clean air channel
and HEPA filter
Malfunction indicator is
blinking
Voice: Please install the
dustbin or vacuum properly
Dustbin maintenance
remains lit
Voice: Please clean the dustbin
timely
The vacuum can not be taken
out
Note:
If the above troubleshooting guide fails to provide a solution, please visit our website
www.tineco.com for further support.
Possible cause
No power
Auto protection for overheating Restart after cooling down
Short runtime
The dustbin is not properly
fitted
The vacuum is not properly
fitted
Motor malfunction
Motor malfunction
The air channel of Clean Station
is blocked
The air channel of Clean Station
is blocked.
The dustbin is not properly
fitted
The vacuum is not properly
fitted
The dustbin needs to be
cleaned
The vacuum is stuck
18
Solution
Plug in the Clean Station
Use normally
Place the dustbin to the right
place
Place the vacuum to the right
place
Press "Self-cleaning" button
to restart the Self-cleaning
mode
Replug in the Clean Station
Check and remove the
blockages
Clean the HEPA filter
Place the dustbin to the right
place
Place the vacuum to the right
place
Clean the dustbin timely
Replug in the Clean Station