weasy WIND162 Manual De Utilización página 7

Speed
0 OFF
1 Low
2 Mid
3 Hi
Oscillating control
The fan can operate in oscillating or stationary mode.
Press the oscillation button to activate the oscillating
To stop the oscillation mode pull the button back up.
Height adjustment
The height of the fan can be easily adjusted.
Loosen the adjustment knob (part 3) and
slide the stand pile up or down as required.
Tighten the knob at the desired position.
Care & Cleaning
CAUTION: Before cleaning, make sure the fan has been
switched off, unplugged and allowed to completely stop
before cleaning.
Using a soft damp cloth, with or without a mild soap solution,
carefully clean the exterior of the product. Never use
abrasive cleaning agents or solvents.
mode.