CARE AND CLEANING
NOTE: Turn off the unit, and unplug it from the wall outlet before maintenance or
cleaning to avoid electric shock.
• Remove the shelves and wash the inside of the unit with a solution made of warm
water and baking soda solution (2 tablespoons of baking soda to 1 Liter of water).
• Unscrew the water reservoir at the bottom of the unit and rinse with water.
• To clean the outside of the unit, use a mild detergent and warm water.
To move your cooler
• Remove anything stored inside.
• Securely tape down all loose parts located inside the unit.
• Turn the leveling feet up to the base in order to avoid damage.
• Tape the door shut.
• Be sure the cooler stays in an upright position during transportation.
TROUBLESHOOTING
Problem
Possible Cause and Suggested Solution
Cellar does
Not plugged in.
not operate.
The appliance is turned off.
The circuit breaker tripped or the fuse is broken.
Cellar is not
Check the temperature control setting.
cold enough.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The light does
Not plugged in.
not work.
The circuit breaker tripped or a blown fuse.
The bulb is out of order.
The light button is "OFF".
EN
15