EVVO INTENSA 20 Manual De Instrucciones página 23

ENGLISH
1. Press " " ON/OFF button and then" " milk frothing button. At this time, the
" " milk frothing button indicator starts flashing until the indicator turns on
normally and the preheating is completed.
2. Pour the iced whole milk into the milk pitcher 1/3 of the way, insert the steam nozzle
1CM into the milk surface, then slowly unscrew the "steam control knob" until the
steam starts to come out. (Fig.5)
(Note: Steam can be adjusted according to personal proficiency. Release a little water
in the steam pipe before foaming)
3. When the temperature of milk reaches about 75 degrees and the milk foam begins
to inflate, you can twist the "steam control knob" to "OFF" and press " " milk
frothing button to close.
6. Hot water function
Press the " " switch, turn the "steam knob" to" ", and the steam pipe starts to
continuously discharge hot water; Turn the "steam knob " to" OFF "stop the hot water.
Additional function -- memory coffee making function
1.After the machine is heated up (when the " " and " " indicator lights become
stay on, press and hold the " " for 3 seconds at the same time , and the funnel
starts to pour coffee. When the desired amount is reached, then press the " "
button, you will listen a sound from the machine. That means the time has been
memorized. The next time you press the " " button, press this time to make coffee
(the longest time is 60 seconds, The setting is invalid for more than 60 seconds,
remaining at the default time.) Single cup flow is set to 40~60ml.
2." "Key memory function setting is the same as above.Double cup flow setting
value is 80~110ml.
3.Restore factory Settings: press and hold " " +" "for 3 seconds at the same
time. When both keys are on and ringing 1 times, reflecting the factory settings have
23
CAFETERA ESPRESSO EVVO INTENSA 20/20S