Publicidad
Idiomas disponibles
Idiomas disponibles
Completely read through the operating instructions, the „Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the
device is passed on, this document must be passed on with it.
Intended use
This clamp and wall bracket is suitable for lasers with a 1/4" thread
for positioning on and attaching to metallic surfaces or ceiling profiles.
The laser can be attached to horizontal and vertical objects by changing
the position of the two magnetic retaining elements. The integrated 5/8"
thread allows the clamp and wall bracket to be attached to construction
site tripods.
1
2
3
4
!
Risk of pinching! Do not reach into
the clamping bracket!
04
EN
5 6
1
7
1
Eyelet for mounting
on the wall
2
Powerful magnets
(backside)
8
3
Lock screw
Fast adjustment
4
1/4" thread
5
Vernier adjustment
mechanism
9
6
5/8" tripod threads
7
Clamp
8
Fast adjustment
9
Clamping bracket
adjustment screw
Publicidad
