Publicidad
Idiomas disponibles
Idiomas disponibles
Completely read through the operating instructions, the „Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the
laser device is passed on, this document must be passed on with it.
Intended use
This cross-line laser is for aligning horizontals, verticals and slopes It projects
a green laser cross and four plumb points which are suitable for transferring
marks between floors and ceilings as well as wall to wall. Optical signals indicate
when the laser is outside its self-levelling range. The laser has an integrated
hand-held receiver mode for the following receivers: G 60, G 30 and M50
RangeXtenders and the CombiRangeXtender 40. It can be combined with
tripods with a 1/4" or 5/8" thread.
General safety instructions
– The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach
of children.
– Modifications or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the
battery charge is weak.
Safety instructions
Using class 2 lasers
12
EN
IEC 60825-1:2014, EN 60825-1:2014/A11:2021
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
Publicidad
