Jammin Pro PD 12 Manual De Instrucciones página 5

message.
Button Behavior [Momentary/Toggle]
Selects one of two types of behavior for the button.
Momentary – Pressing the button will transmit the On value or Note-on message. Releasing the button will
transmit the Off value or Note-off message.
Toggle - Each time you press the button, the On value/Note-on or the Off Value/Note-off message will be
transmitted alternately.
Control Change Number [0...127]
Specifies the control change number of the control change message that is transmitted.
Note Number [C-1...G9]
Specifies the note number of the note message that is transmitted.
On Value [0...127]
Specifies the value of the message transmitted when the button turns on.
If the assign type is set to "Note," the velocity of the note-on message is specified by the On Value setting.
If the On Value is "0," the velocity will be transmitted as "1."
Off Value [0...127]
Specifies the value of the message transmitted when the button turns off.
This can be set only if the assign type is "Control Change."
4. Trigger pads
Depending on the assign type, the trigger pads can transmit note messages or control change messages.
For each trigger pad, you can individually specify the assigned message, the MIDI transmit channel, the
behavior of the trigger pad, the note number, the control change number, and the values transmitted when
the pad turns on or off.
Depending on its assign type, a note numbers or control change number can be assigned to a single trigger
pad.
MIDI Channel [1...16/Global MIDI Channel]
This specifies the MIDI channel of the MIDI messages that are transmitted when you strike the trigger pad. If
you set this to "Global MIDI Channel," the messages will be transmitted on the global MIDI channel.
Assign Type [No Assign/Note/Control Change]
This specifies the type of message that will be assigned to the trigger pad. You can disable the pad (no
assignment), or assign a note message or a control change.
Pad Behavior [Momentary/Toggle]
You can choose one of the following two types of behavior for the trigger pad.
Momentary – The Note On or On Value will be transmitted when you press the trigger pad, and the Note Off
or Off Value will be transmitted when you release it.
Toggle – The Note On or On Value will be transmitted alternately with the Note Off or Off Value each time
you press the trigger pad.
Note Number [C-1...G9]
This specifies the note number of the note message that is transmitted.
Control Change Number [0...127]
This specifies the control change number of the control change message that is transmitted.
On Value [0...127]
This specifies the value of the message that is transmitted when the trigger pad turns on.
You can set this only if the assign type is "Control Change."
Off Value [0...127]
4