Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Technical Data
Hose Length
Hose Diameter
Hose Material
Connectors Material
Maximum Pressure
Weight
BPA-FREE, LEAD-FREE, PHTHALATE-FREE
Water inlet
(Female
connector)
Assembling Hose to Faucet
1. Remove the stainless steel garden hose from the package and completely unwind
your garden hose.
2. Before using the garden hose, make sure the rubber washers (included) are firmly set
inside the two connectors.
3. Attach any spray nozzle or irrigation accessory to the outlet of the garden hose.
4. Attach the garden hose inlet to the water supply of your home.
5. Turn on the tap from your home's water supply to the garden hose.
Storing Your Garden Hose
You can store your stainless steel garden hose on just about any common hose reel
or simply coil it next to your faucet. To extend the life of your hose, store out of direct
sunlight.
NOTE: When you are finished watering with your stainless steel hose, release the water
pressure before storing. To extend the life of your hose, shut off your water and remove or
open the nozzle.
100 ft (30 m)
1/2 in. (1.27 cm)
304 stainless steel
Aluminum
300 PSI
10.8 lbs (4.9 kg)
Faucet
Rubber washer
Water outlet
(Male connector)
2
Rubber
washer
Publicidad
