Publicidad
Two-Key Handset Operation
1. Panel
UP
2.Initialization
Step
Action
Hold both ∧&∨
1
simultaneously for
more than 3 seconds
2
Keep holding ∧&∨
3
Release both ∧&∨
The initialization process must be completed before the first running
after table is set up or gets parts replaced
3.Move up and down
Step
Operation
1
Hold ∧
2
Release ∧
3
Hold ∨
4
Release ∨
6
DOWN
Motion
Legs begin to move down
at half speed of normal
operation
Legs move down to the
lowest position and
rebound 2-5 mm, then stop
Initialization is completed
Motion
The height moves up
The height stops
The height moves down
The height stops
Trouble Shooting
Fault Phenomenon
Re-initialize the table.
After connecting the power,
press up or down, and the
Check if the connection is correct.
legs have no response.
After connecting the power,
press and hold up & down
Check if the connection is correct.
together, the legs have no
response.
The height is rising
Check if the input power is correct.
strangely slowly.
The height doesn't move
Please contact your supplier.
by your control.
The height moves unevenly.
Check if the connection is correct.
The height can only move
Re-initialize the table.
down but not up (and vice
versa).
Check if the weight of the load on
The table slides down itself.
the table is over 75 kg.
The table goes into
Check if the weight of the load on
initialization frequently.
the table is over 75 kg.
Handling
7
Publicidad
