Publicidad
Idiomas disponibles
Idiomas disponibles
basic s afety p recautions
should a lways
befollowed toreduce t herisk offire,
electric s hock, and personal injury,
including thefollowing:
Toreduce riskof injury:
Before a nyuse, b esure everyone
using this electric p roduct reads a nd
understands
allsafety a nd operation
instructions
contained inthismanual.
SAVE THESE INSTRUCTIONS
and
review frequently prior to use. Store in
wall charger slot.
AVOID DANGEROUS
ENVIRONMENTS
and weather
conditions when using this tool.
DO NOT USE battery operated
appliance in the rain.
KEEP CHILDREN AWAY - All
visitors
should be kept at a safe distance from
work area.
DO NOT ALLOW CHILDREN or
untrained individuals to use this pole
saw.
STORE IDLE UNIT INDOORS - When
not in use, the unit should be stored
indoors in a dry location - out of reach
of children.
DON'T FORCE THE TOOL - It will do
the job better and with tess likelihood
of a risk of injury at the rate for which it
was designed.
USE RIGHT TOOL - Do not use the
tool for any job except that for which it
is intended.
KEEP HANDS AND FEET away from
cutting area.
DRESS PROPERLY = Do not wear
loose clothing or jewelry. They can
be caught in moving parts. Use of
rubber gloves and non-skid footwear is
recommended
when working outdoors.
Wear protective hair covering to
contain long hair.
DON'T OVERREACH
- Maintain
proper footing and balance at all times.
Use both hands to operate unit safely.
USE SAFETY GLASSES - Always
wear proper eye protection, and use a
face or dust mask if operation is dusty.
ALWAYS WEAR A HARDHAT when
operating the pole saw.
ALWAYS WEAR SAFETY
FOOTWEAR,
snug fitting clothing,
protective gloves, hearing protection
and head protection when using the
pole saw.
CARRYING THE POLE SAW =Always
carry the saw by gripping the fiberglass
pole at its balance point with the saw
chain in front of you for easy visibility.
MAINTAIN UNIT WITH CARE - Keep
the unit clean for best performance
and to reduce the risk of injury. Follow
instructions for service. Keep handles
dry, clean, and free from oil and
grease,
AVOID UNINTENTIONAL
STARTING
- Don't carry the appliance while
holding the switch area. The unit is
shipped partly charged, and may start
inadvertently
if not handled properly.
CHECK DAMAGED PARTS - If
any component of the appliance
experiences a hard impact, check that
no parts were damaged and verify that
the unit operates properly. Check for
misalignment or bending of moving
parts, breakage of parts, and any other
condition that may affect operation.
A part that is damaged should be
properly repaired or re-placed by an
authorized service center.
KEEP TOOLS SHARP and clean for
better and safer performance.
FOLLOW INSTRUCTIONS
for
lubricating and changing accessories.
KEEP HANDLES DRY, clean, and free
from oil and grease.
REMOVE BATTERY from pole saw
when not in use, before servicing,
Publicidad
