Intenso MAGNETIC WIRELESS CHARGER BS13 Manual Del Usuario página 14

c) Watch
You can charge your Apple Watch on the watch area (upper area behind the stand). Apple Watches as of
series 3 are supported. The charging process starts automa琀椀cally and is indicated by the watch.
If the charging process does not start, please check,
a. whether the device to be charged supports the Qi standard and whether your smartwatch for the
watch area is an Apple Watch series 3 or newer.
b. whether there is a foreign object between the devices or you are using an unsuitable case.
c. whether you have chosen the enclosed quick-charge power supply or a di昀昀erent but compa琀椀ble
one. If this is not the case, replace it accordingly.
d. whether you have 昀椀rst established the power supply and only then started the charging process. If
not, please disconnect both devices from each other and unplug the power supply for a few seconds.
Then plug the power supply unit back into the socket and only then start the charging process.
e. whether the cable ends and the power supply unit are correctly connected.
Please note that the ambient temperature and the charging electronics of the device to be charged have
an e昀昀ect on the charging behaviour over which the induc琀椀ve charging sta琀椀on itself has no in昀氀uence. For
example, the charging speed can be reduced at increased temperatures or already reached charging levels,
the charging process – especially with the watch – can be brie昀氀y interrupted or brie昀氀y fail to make any
charging progress.
Step 3: End charging process
To end the charging process, simply remove your device from the induc琀椀ve charging sta琀椀on.
SERVICE/DISTRIBUTOR
INTENSO INTERNATIONAL GMBH I Kopernikusstraße 12-14 I D-49377 Vechta
Email (technical support):
Email (RMA number):
Internet:
Telephone (technical support):
DISPOSAL
Disposal of old electronic equipment:
The devices marked with this symbol are subject to the European Direc琀椀ve 2012/19/
EC. All electrical appliances and old electrical appliances must be disposed of separate
from the municipal waste stream via designated collec琀椀on facili琀椀es appointed by the
government or the local authori琀椀es. You avoid environmental damage with the proper
disposal of old electrical equipment.
Packaging:
Packaging is raw material. The packaging material of this product is suitable for recycling
and can be re-used. Please pay a琀琀en琀椀on to the local recycling provisions when disposing
of any materials.
support@intenso-interna琀椀onal.de
rma@intenso-interna琀椀onal.de
www.intenso.eu
+49 (0) 4441 – 999 111
(Mon. – Thur. 09:00 – 16:30; Fri. 09:00 – 14:00)
EN - Page 5 of 6