Kobra K240.1 Instrucciones De Manejo página 9

If you have any problems with your shredder check the symptoms and solutions outlined below.
least
If this fails to solve the problem contact the nearest KOBRA agent.
Never open the head of the shredder to try to repair it. You risk electrocution and void your warranty.
or at
y).
open,
PROBLEM
ption
The shredder won't
e the
start
ar
high
h the
drop
il on
g oil
Shredder never
rosol
stops working.
Notable reduction
in shredding
capacity
i :
n accorDance with
t :
he manufacturer
D
eclares herewith that the following PaPer shreDDers comPlY with the stanDarDs of the
KoBra : K 240.1 , 260.1 , 300.1 , 300.2
series oBra
a :
PPlieD stanDarDs
en 60950-1:2006/a11:2009/a1:2010/a12:2011/a2:2013
en 55014-1 :2006+a1 :2009+a2 :2011
en 55014-2 :1997+a1 :2001+a2 :2008
B m , 15.01.2020
ovisio asciago
a.De rosa
t o
echnical ffice
WHAT YOU SEE
- Light (S) fails to come on
- Red light (L) comes on
- Light (S) comes on
- Light (S) on, cutting
knives working
- Capacity lower than
when knives are oiled
- lvD 2014/35/eu
Directive
- 2011/65/eu r hs
Directive o
- 2014/30/ue
Directive
elcoman srl
via gorizia,9
20813 Bovisio masciago (mi) - italY-
TROUBLE SHOOTING
CAUSE
- Switch position (H)
- Power cable is not plugged in
properly
- There is no power to the sh-
redder
- Door (C) not closed properly
- Bag is full
- Motor in heat protection
mode
- Material and/or dirt on or
between electronic eyes
- Cutting knives need oiling
D c
eclaration of onformitY
lvD 2014/35/eu
EN 61000-3-2 :2014
EN 61000-3-3 :2013
9
ACTION
- Flick the switch (H) to the (I) position
- Check plug is inserted into socket
properly
- Check socket is switched on
- Close door properly
- Empty bag
- Wait 15 minutes for motor to cool
down
- Remove deposit from electronic eyes
or free electronic eyes
- Clean electronic eyes with a brush
- Oil the cutting blades manually
KOBRA 240.1, 260.1, 300.1, 300.2