3. SD Card Mode
Insert a SD card into the SD Card Slot of your transmitter. It will automatically enter
SD card mode (the LED Display will show a "
the SD card.
To control the music in your SD card, repeat the same operation as in the "For music
playback" section.
NOTES:
· To switch between SD card mode and Bluetooth mode, double press the Next Track
Button. When switched back to the Bluetooth mode, the transmitter will automati-
cally play the music from your connected media device.
· It may take a few seconds for the transmitter to read your SD card.
4
Specifications
Model NO.
Power Input
Power Output
Power Consumption
FM Frequency Range
Bluetooth Range
Supported Memory Cards (SD card)
Dimension
Weight
5
Safety Precautions
1. Avoid dropping.
2. Do not disassemble this device.
3. Do not expose this device to rain or moisture or submerge in water.
4. Ideal temperatures are 0°C to 35°C. Avoid extreme temperatures.
5. Keep the device away from excessive heat, such as sunshine, fire or the like.
6. Do not use the device outdoors during thunderstorms.
7. Use original or certified cables.
8. Do not use any corrosive cleaner/oil to clean.
9.To prevent damage to your device's parts or internal circuits, do not use it in dusty,
smoky, damp or dirty environments.
" icon), and play the music files in
CAD-FMX121
DC 12-24V
Type C / USB Port: 5V / 2.4A
0.4W (Max.)
87.5-108.0Mhz
About 20ft (6m)
Up to 64 Gbyte
3.4×2.0×1.5" (87×52×38mm)
1.2oz (34g)
EN 3