Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Working pressure
5–7 bar (500–700 kPa) measured at the connection to the control
valve.
4. Maintenance
Personnel who are responsible for maintenance of the equipment
must be trained and well acquainted with this type of work.
4.1 Cleaning
The silencer of the compressed air accessory, i.e. the part inserted
into the hose (Fig. 3), is sensitive to water. So clean the equipment
before dismantling it.
Sundström cleaning tissues SR 5226 are recommended for daily
care.
If the equipment is more heavily fouled, use a soft brush or sponge
moistened with a solution of water and dishwashing detergent or
the like. Rinse the equipment and leave it to dry.
For particulars of cleaning of the Sundström human interfaces, see
the appropriate user instructions.
N.B. Never use a solvent for cleaning.
4.2 Storage
After cleaning, store the equipment in a dry and clean place at room
temperature. Avoid direct sunlight.
4.3 Maintenance schedule
The schedule below shows the recommended minimum require-
ments on maintenance routines, so that you will be certain that the
equipment will always be in usable condition.
Visual inspection
Functional check
Cleaning
4.4 Spare parts
Use only genuine Sundström parts. Don't modify the equipment.
The use of 'pirate parts' or any modifications made to the equip-
ment may reduce the protective effect and compromise the appro-
vals granted to the equipment.
4.4.1 Control valve
The control valve is a complete, sealed unit. Don't attempt to
repair or modify it.
Before
After
use
use
•
•
•
•
5. Parts list
The item numbers below refer to Fig. 1 at the end of the user
instructions.
No Part
1. Connection adapter
2.
Belt
3. SR 348 Control valve assembly
Flow meter. Fig. 2
4. Compressed air tube. See section 3. -
SR 99 Compressed air filter. Fig. 7
SR 5226 Cleaning wipes, box of 50
6. Approvals
• SR 507 together with head tops SR 520, SR 530, SR 540, SR
540 EX, SR 561, SR 562, SR 580, SR 584/SR 580, SR 900/
SR 951 or SR 900/SR 951 and air hose SR 358 or SR 359:
EN 14594:2005, class 3B.
• SR 507 together with head tops SR 520, SR 530, SR 540, SR
540 EX, SR 561, SR 562, SR 580, SR 584/SR 580, SR 900/SR
951 or SR 900/SR 951 and air hose SR 360: EN 14594:2005,
class 3A.
The EC type approval certificate has been issued by Notified Body
No. 0194.
For address, see back-cover.
Australian StandardsMark
The Compressed Air Attachment SR 507 is tested and certified to
comply to AS/NZS 1716:2012.
Annually
The StandardsMark is issued under licence by SAI Global Pty
Limited Lic No. 766 (ACN 108 716 669, "SAI Global").
•
•
Ordering No.
R03-0602
R03-1510
R03-0601
R03-0346
H03-2612
H09-0401
17
Publicidad
Tabla de contenido
