Publicidad
Idiomas disponibles
Idiomas disponibles
EN ENGLISH
PRODUCT FUNCTION
The Smart Start Dual Battery Isolator and Wiring Kit (SBI12KIT) comes with
everything required to install your Smart Start Dual Battery Isolator, including
the Smart Start itself.
KIT CONTENTS
Part Description
1. SBI12 Battery Isolator
2. 200 mm (7.9") Battery Positive Cable (red)
3. 1800 mm (70.9") Battery Positive Cable (red)
4. 60 A Fuses
5. Fuse Holders (including mounting nuts)
6. Battery Terminals
7. Isolator Terminal Protectors
8. Battery Terminal Protector for Auxiliary Battery Positive Terminal
9. 750 mm (29.5") Auxiliary Battery Ground Cable (black)
WIRING INSTRUCTIONS
1. REMOVE Main Battery Earth.
2. Place fuses in fuse holders and attach the red cables as
shown in diagram 1.
1
2 | EN English
English
2–3
EN
Deutsch
4–5
DE
Español
6–7
ES
francais
8–9
FR
Quantity
1
2
2
2
2
2
2
1
1
2
Italiano
10–11
IT
polski
12–13
PL
Arabic
14–15
AR
Perfectly suited to the Do-It-Yourself installer, the SBI12KIT requires no
crimping or soldering, its just plug and play.
The SBI12KIT features high quality MTA 60 Amp fuses and fuse holders with
the corresponding ring terminals already attached to the wires.
2
3
1
7
6
3. Connect a short red cable to one of the supplied battery terminals by
stripping back the wire and inserting it into the battery terminal (as shown
in diagrams 2 and 3). This terminal will attach to your auxiliary battery
positive (+) terminal.
4
5
8
9
3
Publicidad
