Home Decorators Collection ELSIE 60 Instrucciones De Montaje página 10

1
1.1-1.2. Position the positioning tool (A) as illustrated. Level the positioning tool (A) and mark the positions of the holes on the
wall.
1.3. Remove the tool and drill pilot holes in the marked locations with a ø5/16 in drill bit.
1.4. If there are no studs located behind the support bar anchor (C), then insert the wall anchors (AA) using a rubber mallet until
the wall anchors are flush with the wall.
1.1
A
1 1/2 in
1.2
A
1.3
ø5/16 in
SUPPORT BAR INSTALLATION
A
AA
A
If there are no studs aligned to
the wall track behind the drywall,
use the wall anchors to ensure
the screws won't become loose.
1.1
A
1 1/2 in
1.2
A
WARNING!
1.4
AA
PAGE 10