hillvert HT-TEMPLE-1N Manual De Instrucciones página 23

EN
Use the M6 x 35 mm screws (2) to mount the holder:
Install the control lever:
3.3. Working with the device
Working speed:
It is recommended that the spreader be driven at a speed of about 5 km / h. Lower or higher speeds should
be avoided as they may change the form of spreading.
Using fertilizer:
Moist fertilizer (in the form of granules) can also affect the form of spreading and the size / speed of spreading
the fertilizer.
Cleaning:
After each use, thoroughly clean the inside of the spreader.
Make sure the device is dry before storing.
Lubrication:
Lubricate all moving parts of the drill.