Publicidad
Idiomas disponibles
Idiomas disponibles
Available versions
Part number
DCT1A60V10LS1X
DCT1A60V10LS2EC
DCT1A60V10LS3EC
DCT1A60V10LK1EC
DCT1A30V10LS1X
DCT1A30V10LS2EC
DCT1A30V10LS3EC
DCT1A30V10LK1EC
Evaluation certificate
The evaluation certificate is provided by an independent notify body, which performs tests and verifications to fulfill the following
standards:
Standard
IEC 62052-11
IEC62052-31
IEC62053-41*
VDE-AR-E 2418-3-100
Annex A
WELMEC 7.2
(*) Except for durability test
Configuration software
Configuration software
UCS is the DCT1 configuration software available in desktop version. It may connect to DCT1 via RS485 (Modbus RTU protocol).
UCS allows to:
set up the unit (online or offline);
l
display the system state for diagnostic and setup verification purposes
l
Overview of the UCS functions:
Setting up the system with DCT1 connected (online setup)
l
Enter maintenance mode and set cable loss parameters (cable resistance)
l
Defining the setup with DCT1 non connected, then applying it later (offline setup)
l
Displaying the main measurements
l
Check temperature on the shunt
l
Displaying overrange and overtemperature warnings
l
Recording the measurements of selected variables
l
6
DCT1 - User manual | 22/06/2023 | CARLO GAVAZZI Controls SpA
Voltage
Current
150...1000 V
6-120 (600) A
150...1000 V
6-120 (600) A
150...1000 V
6-120 (600) A
150...1000 V
6-120 (600) A
150...1000 V
2.5-50 (300) A
150...1000 V
2.5-50 (300) A
150...1000 V
2.5-50 (300) A
150...1000 V
2.5-50 (300) A
Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 11:
Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31:
Electricity metering equipment - Particular requirements - Part 41: Static meters for DC energy
Electric mobility - Measuring systems for charging stations
Software Guide (Measuring Instruments Directive 2014/32/EU)
Output
Modbus RTU
Modbus RTU
Modbus RTU
SML
Modbus RTU
Modbus RTU
Modbus RTU
SML
Description
Metering equipment
Product safety requirements and tests
(classes 0,5 and 1)
Evaluation
Signature
certificate
-
-
256 bit
x
x
384 bit
x
384 bit
-
-
256 bit
x
x
384 bit
x
384 bit
Publicidad
