Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
H-10795
BIG DADDY
CROWD CONTROL
TOOLS NEEDED
5/16" and 17/64"
Drill
Drill Bits
Wall-Mounted Unit x 1
WALL MOUNT INSTALLATION
1.
Using the wall mount plate as a template, mark
screw hole locations on the wall. (See Figure 1)
NOTE: Ensure marked locations are level
before drilling.
Figure 1
Wall Mount
Plate
2. Drill four 5/16" holes in wall in previously marked
locations.
WARNING! Before drilling into a wall, always
ensure the area is clear of any electrical wiring
or plumbing pipes.
PAGE 1 OF 6
Phillips
Pencil
Screwdriver
Wall Receiver x 1
INSTALLATION
Adjustable
Wrench
PARTS
Wall Unit Screw x 4
3. Remove nuts from wall unit screws, and insert into
previously drilled holes in wall. (See Figure 2)
Figure 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Wall Anchor x 2
Screw x 2
Wall Unit
Screw
0723 IH-10795
Publicidad
Manuales relacionados para Uline H-10795
Resumen de contenidos para Uline H-10795
- Página 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-10795 BIG DADDY CROWD CONTROL TOOLS NEEDED 5/16" and 17/64" Phillips Pencil Adjustable Drill Drill Bits Screwdriver Wrench PARTS Wall-Mounted Unit x 1 Wall Receiver x 1 Wall Unit Screw x 4...
- Página 2 9. Place wall receiver over screw holes and attach using supplied screws. (See Figure 8) 6. Using wall receiver as a template, mark the screw Figure 8 hole locations on the wall. (See Figure 5) Figure 5 1-800-295-5510 uline.com PAGE 2 OF 6 0723 IH-10795...
- Página 3 H-10795 CONTROL DE MULTITUDES DE GRAN CAPACIDAD HERRAMIENTAS NECESARIAS Broca de Desarmador Lápiz Llave Inglesa Taladro 5/16" y 17/64" de Cruz PARTES 1 Unidad para 1 Receptor para 4 Tornillos para la 2 Taquetes 2 Tornillos Instalación en Pared Instalación en Pared Unidad de Pared INSTALACIÓN...
- Página 4 6. Utilizando el receptor de pared como plantilla, (Vea Diagrama 8) marque la ubicación de los orificios para tornillos en la pared. (Vea Diagrama 5) Diagrama 8 Diagrama 5 800-295-5510 uline.mx PAGE 4 OF 6 0723 IH-10795...
- Página 5 H-10795 1-800-295-5510 uline.ca BIG DADDY – CANALISATION DES FOULES OUTILS REQUIS Mèche de perceuse de Tournevis Crayon Clé à molette Perceuse 5/16 po et de 17/64 po cruciforme PIÈCES Dispositif à Récepteur mural x 1 Vis de dispositif mural x 4...
- Página 6 (Voir Figure 8) 6. Utilisez le récepteur mural comme modèle pour marquer l'emplacement des trous de vis sur le mur. Figure 8 (Voir Figure 5) Figure 5 1-800-295-5510 uline.ca PAGE 6 OF 6 0723 IH-10795...