Publicidad
Idiomas disponibles
Idiomas disponibles
RECEPTION OF THE MACHINE
Inspect the outside packing. In case of damages, MAKE THE CORRESPONDING CLAIM TO THE
CARRIER.
To confirm the existence of damages, UNPACK THE MACHINE IN THE PRESENCE OF THE CARRIER and
state any damage on the equipment on the reception document, or on a separate instrument.
Always state the machine number and model. This number is printed on three locations:
1. PACKING
On the outside, it contains a label with the manufacturing number (1).
2. EXTERIOR OF THE EQUIPMENT
On the back of the equipment, there appears a label
with the same characteristics as the previous one (1).
3. NAMEPLATE
On the back of the machine.
Check that in interior of the machine the
installation kit is complete and comprises:
- Ice scraper, ¾ gas pipe, 22 mm (0.86 inches)
(1)
discharge hose, two filters and manual.
- In some models, shims are included.
- Warranty and serial number.
CAUTION: ALL PACKING ELEMENTS (plastic bags, carton boxes and wood pallets)
SHOULD BE KEPT OUTSIDE THE REACH OF CHILDREN, AS THEY ARE A SOURCE
OF POTENTIAL HAZARD.
INSTALLATION
THIS ICE MAKER IS NOT DESIGNED FOR OUTDOOR OPERATION.
An incorrect installation of the equipment may cause damages to individuals, animals
or other materials, being the manufacturer not responsible for such damages.
CAUTION:
The machines are designed to operate at room temperature between 5ºC (41ºF) and 43ºC (109.40ºF).
There may be some difficulties in ice- cube removal under the minimum temperatures. Above the maximum
temperature, the life of the compressor is shortened and the production is substantially less.
The machines with air-cooler condenser take the air through the front section, and drive it off through the
lateral and back louvers.
Do not place anything over the maker or in facing the front louver.
14
Publicidad
