Technical Specifications - tbs electronics Omnicharge OC12-90 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

6. TECHNICAL SPECIFICATIONS

Parameter
AC input voltage
Full load power consumption
AC input current (115V/230V)
Total DC output current
Nominal DC output voltage
Number of full current outputs
Charge characteristic
Standard absorption voltage
Standard float voltage
Standard equalize voltage
Supported battery types
Recommended battery capacity
DC current draw (charger off)
Operating temp. Range
Storage temp. Range
Cooling
TBSLink enabled
Protections
Indications
DC output connections
AC input connections
Enclosure body size (HxWxD)
Total weight
Protection class
Standards
1) Maximum output current tolerance is +/-5%. Maximum set point voltage deviations are +/-1%. All set point voltages are temperature
compensated when the battery temperature sensor is connected.
2) Value is programmable.
3) Always consult battery manufacturers specifications for maximum allowable charge current.
4) At higher ambient temperatures (>40°C), maximum output current may be reduced automatically.
Please act according to your local rules and do not dispose of your old products
with your normal household waste. The correct disposal of your old product
will help prevent potential negative consequences for the environment and
human health.
OC12-90
100-260Vac / 47-63Hz
1550VA
13.5A / 6.8A
1) 4)
90A
1)
12Vdc
2)
IUoUoP, intelligent 4-stage, temp. compensated
2)
14.4Vdc
2)
13.5Vdc
2)
15.8Vdc
2)
3)
180-900Ah
-10°C...+55°C (humidity max. 90% non condensing)
-20°C...+70°C (humidity max. 90% non condensing)
Low AC input voltage, output short circuit, high
temperature, battery overcharging and reverse polarity
Power on, output current, state of charge, error
CE marked. EMC : EN55016-2-1(/A1), EN55016-2-
3(/A1), EN 61000-4-2(3/4/5/6). Safety : EN60335-1,
OC24-50
1700VA
15A / 7.5A
50A
24Vdc
3 (internally isolated)
28.8Vdc
27.0Vdc
31.6Vdc
Flooded / Gel / AGM / LiFePO4 / Custom
100-500Ah
< 0.1mA
Variable speed fan
Yes
(fuse)
4x M8 bolts
Screw terminals
370 x 271 x 132mm
6.2kg
IP21 (mounted in upright position)
EN60335-2-29
Note : the given specifications are subject to change without notice.
22
OC24-80
OC48-40
180-260Vac / 47-63Hz
2750VA
- / 12A
80A
40A
48Vdc
57.6Vdc
54.0Vdc
63.2Vdc
160-800Ah
80-400Ah

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Omnicharge oc24-50Omnicharge oc24-80Omnicharge oc48-40

Tabla de contenido