MENIKINI MK-800 Manual De Uso Y Mantenimiento página 37

Unwind the cable from the relative
cable winder hooks and insert the
plug into the socket of a suitable
wiring system. Unless otherwise sta-
ted the machine is suitable for
220V- 50Hz connection (Fig. 9).
Turn on the machine using the
main switch located on the side
of the control panel. (1 Fig. 10)
Fill the bottle supplied with run-
ning water. Only fill with running
water from the mains. Never use
any other substance (A - Fig. 10)
Remove the cap on the top part
of the machine and exerting a
slight pressure on the bottle,
fill the tank.
The valve permits an air release
and rapid filling (B - Fig. 11).
When the boiler is filling with
wa-ter, the indicator (2 - Fig.
10) and the acoustic signal
switch off.
(QJOLVK
)LJ9
)LJ 10
)LJ 1
37
A
B