Deltaco Gaming 4222179 Manual Del Usuario página 8

ENG
1. Microphone
2. Volume knob
3. Sound on/off (mute button)
4. 3.5 mm audio port for headphones
5. Ring light
6. Phone holder (in ring light)
7. Adjust height
8. C-clamp
9. Web camera
10. Pop filter
11. Microphone holder
12. USB-A to USB-B cable (for microphone)
13. Desk arm
14. Clamp for desk arm
15. Remote control for ring light
16. Remote control for taking "selfies"
Use
Assemble the different devices and parts to your desk
as it suits you.
Figure showing assembled desk arm, pop filter, mount,
microphone and assembled ring light.
Place your phone in the phone holder in the ring light.
Attach the ring light with the small screw. Because of
the ball joint design, the light can be adjusted 360°.
Use the thumb screw to fasten. Attach the pole to the
ball joint.
Mount the ring light on your desk with the C-clamp.
Adjust the height.
8
Use the clamp for the desk arm to mount it on the
desk. Place the desk arm in the clamp.
Use the thumb screw to fasten the desk arm.
Fasten the microphone holder. Screw size is 3/8".
Install the microphone on the microphone holder.
Fasten the pop filter to the desk arm.
Microphone
Microphone placement: we recommend a distance
of about 15 cm between microphone and voice or
sound source. Feel free to try different distances.
Closer could give a more intimate and full sound, while
further away makes a more airy or roomy sound.
Mute button: Press to turn the microphone's sound on
or off. Green = sound on. Red = sound off.
Press and hold the mute button for about 3 seconds
to activate or deactivate noise cancellation.
The LED indicator above volume knob indicates if
noise cancellation is on (blue light) or off.