Descargar Imprimir esta página

TREVIDEA G3 Ferrari PULISCO G90011 Manual De Instrucciones página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

If you need to change a filter, make sure that the re-
assembly is made properly and new filters are not wet or
damp. In this case, wait for it to dry completely before
assembling.
Do not expose the appliance to high temperatures and do
not bring it closer to heat sources.
Never leave the appliance unattended while it is running.
Only use the button to turn on or off the vacuum cleaner.
In case of overheating, if the unit produces smoke, smell
or unusual noises, turn it off immediately and check that
the pipe is free from obstacles. If the tube is free, contact
the service center for fixing it.
To avoid serious damage, do not walk on the power cord.
Disconnect
immediately after use. Additionally it is advisable to wind
the power cord in order to ensure a better cleaning and to
avoid any risk of damage.
Do not immerse the motor unit in water or other liquids,
clean it with a damp cloth only.
Do not use the appliance if the dust bin is not installed.
Do not use the product without proper filtering system
assembled: this may seriously damage the engine
avoiding the warranty. Use only on dry surfaces.
Caution when using the device on the stairs.
CAUTION: while the unit is running, do not approach
the air inlet to ears, eyes, etc., or to fragile items such
as vases, tools, electronic machines.
DESCRIPTION G90011
1. Power button
4. Dust bin
7. Air outlet filter
10. Hose handle
13. Brush
C. Opening lid button
the
plug
2. Power cord rewind button
5. Handle
8. Flexible hose
11. Air regulator
A. Dust bin release button
D. Cyclone Pre-filter
from
the
3. Suction nozzle
6. Resting hook
9. Central pivot wheel
12. Telescopic tube
B. Dust bin cover lid
E. Filter
electrical
outlet
11

Publicidad

loading

Este manual también es adecuado para:

Hjx1507-j