Contact LEXC002 Manual De Usuario página 2

1.4 How to attach and remove the straps
Although only one strap is included in the box, it can be attached and removed easily. The
shorter strap must be placed in the display's top slot, while the longer strap must be placed
in the display's bottom slot. Otherwise, the insertion system may be irreparably damaged.
1. To remove a strap: Hold the strap and carefully slide the metal piece out of its hole.
2. To attach a strap: Hold the strap and insert the metal piece on one end. Then, slide the
metal piece on the other end and insert the end of the strap so that when you let go of the
metal piece it fits into the case hole.
1.5 Charging
The Contact smartwatch's full charge time is approximately 3,5 hours and the battery can
last up to 5 days depending on the usage.
Use the 45 cm USB-A cable with magnetic charging port that is included in the box to
charge the smartwatch. Connect the USB-A connector to a charger, computer output or
powerbank and place the magnetic port in a way so that it sticks to the 2 golden pins
featured on the back part of the body watch.
1.6 Power on/off
To turn on the smartwatch press the dial button for 4 seconds.
To turn o the smartwatch press the dial button for 4 seconds.
You can also power o , restart or reset the smartwatch. To do so access the smartwatch
main menu and access the watch settings (gear icon). Once inside, scroll down and tap on
system. When you do so, you will see a list of three options: restart, power o and reset. Tap
on the desired option.
1.7 About IP protection rating
The Contact smartwatch has an IP68 protection rating. This means that it can withstand
being submersed under water 2 meters for up to 30 minutes.
Note: In case of swimming in the sea or in a saltwater pool, it is recommended to rinse the
watch with fresh water after immersion due to the corrosive e ect of salt water.
2. Initial setup
2.1 Download the app
The Contact smartwatch compatible app is called Da Fit. There are several ways to
download it:
https://apple.co/45ZyVTq
- Tap here to download the Da Fit app from Google Play or App Store.
- You can also download the app directly by typing "Da Fit" in the Google Play or App
Store search engine.
- Another way to download the app is from a QR code. To view this QR code access the
smartwatch settings. Then, scroll down and tap on the about option and then on APP QR
Code.
You can also download the app directly from your App Store or Google Play.
https://bit.ly/44SFExf