Connection Warnings - FPC EGL 6K Manual De Usuario

1-4.

Connection Warnings

•
There is no standard backfeed protection inside, please isolate the UPS before working according to this
circuit. The isolation device must be able to carry the UPS input current.
• This UPS should be connected with TN earthing system.
• The power supply for this unit must be single-phase rated in accordante with the equipment nameplate.
It also must be suitably grounded.
• Use of this equipment in life support applications where failure of this equipment can rasonably be
expected to cause the failure of the life support equipment or to significantly affect its safety or
effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic
or mixture with air, oxygen or nitrous oxide.
• Connect your UPS power module's grounding terminal to a grounding electrode conductor.
• The UPS is connected to a DC energy source (battery). The output terminals may be live when the UPS
is not connected to an AC supply.
Beforeworking on this circuit
- Isolate Uniterruptible Power System (UPS)
- Then check for Hazardous Voltage between all
terminals including the protective earth
Risck of Voltage Backfeed
-
2