A. WARNINGUseofpressure washer c ould
,_
create puddles andslippery
surfaces c ausing youtofall
resulting indeath or serious injury.
Kickback f romsprayguncould causeyoutofall
resulting indeath or serious injury.
, Operate pressure washer from a stable surface.
The cleaning area should have adequate slopes and
drainage to reduce the possibility of a fall due to slippery
surfaces.
Be extremely careful if you must use the pressure washer
from a ladder, scaffolding, or any other similar location.
Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when spray gun kicks
back.
_, WARNING
Unintentional sparking could cause
fire or electric shock resulting in
death or serious injury.
WHEN ADJUSTING
OR MAKING
REPAIRS TO YOUR
PRESSURE WASHER
, Disconnect the spark plug wire from the spark plug and
place the wire where it cannot contact spark plug.
WHEN TESTING FOR ENGINE SPARK
, Use approved spark plug tester.
DO NOT check for spark with spark plug removed.
A. WARNmNG
Starter and other rotating parts
could entangle hands, hair, clothing, or
accessories resulting in serious injury.
, NEVER operate pressure washer without protective
housing or covers.
, DO NOT wear loose clothing, jewelry or anything that
could be caught in the starter or other rotating parts.
, Tie up tong hair and remove iewelry.
WARNmNG
Risk of eye or bodily injury.
Spray could splash back or propel
objects resulting in serious injury.
, Always wear indirect vented (chemical splash) safety
goggles marked to comply with ANSI Z87.1 when using
or in vicinity of this equipment.
, NEVER substitute safety gtasses or dry-condition
goggles for indirect vented safety goggles.
, Always wear protective clothing such as a tong-sleeved
shirt, tong pants and close4oed shoes.
, NEVER operate pressure washer when barefoot or
wearing sandals or shorts.
CAUTION
Excessively
high operating
speeds
could result in minor injury.
Excessively
low speeds
impose a heavy load.
, DO NOT tamper with governor spring, links or other parts
to increase engine speed. Pressure washer supplies
correct rated pressure and flow when running at
governed speed.
, DO NOT modify pressure washer in any way.
NOTICE
High pressure spray could damage fragile
items including glass.
, DO NOT pointspray gun at glass whenusingred (0°) spray tip.
, NEVER aim spray gun at plants.
NOTICE
Improper
treatment
of pressure
washer
could damage
it and shorten
its life.
o !f you have questions about intended use, ask dealer or
contact qualified service center.
, NEVER operate units with broken or missing parts, or with-
out protective housing or covers.
, DO NOT by-pass any safety device on this machine.
, DO NOT tamper with governed speed.
, DO NOT operate pressure washer above rated pressure.
, DO NOT modify pressure washer in any way.
, Before starting pressure washer in cold weather, check all
parts of the equipment to be sure ice has not formed there.
, NEVER move machine by pulling on hoses. Use handle
provided on unit.
, This equipment is designed to be used with Sears
authorized parts ONLY. If equipment is used with parts
that DO NOT comply with minimum specifications, user
assumes all risks and liabilities.